Genuine & Original Full System and Spare Parts

UTI-Ullage Temperature Interface Sensing Tapes

Tankers - Barges - Chemical vessels - Petro chemical Industries

Suitable for Marine & Land-Based Tank Facilities &
for Environmental Monitoring Well applications

Restricted Trimode

 Other Applications:

  • Open gauging (“O” type) (Non-Toxic product vapors only)
  • Environmental gauging (“E” type) (Typical well monitoring vapors only)

These portable FLEXI-DIP “UTI” gauging tapes provide a convenient and accurate means for measuring ullage, lower oil-water interface, and temperature.

MMC’s UTI gauging tapes can detect all floating and non-conductive hydrocarbons. Each instrument is designed for ease of use. Gauging for liquid or interface level is accomplished simply and quickly. When the electronic probe is lowered and senses a hydrocarbon, a steady horn tone is sounded and a yellow LED illuminates. When sensing an oil-water interface or a non-conductive liquid heavier than water, an intermittent horn tone sounds and a red LED start flashing. This gauging system is certified as “Intrinsically Safe” for use in all class IIC hazardous atmospheres.

ACCURACY

Tape Reading:of Fluid level +/- 1/8 inch (3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).

Temperature Display: +/- 0.5° F (+/- 0.3° C), +/- 1 digit error.

  • Ambient Temperature Limits: -20 °F (-7 °C) to 120 °F (49 °C).
  • Product Temperature Limits: -40 °F (-40 °C) to 180 °F (82 °C).
  • Battery: 9-Volt Eveready # 522 or Mallory MN1604.
  • Tape Lengths: 50 ft. (15m), 75 ft. (25m), 100 ft. (30M).
  • Typical Weights: 14 lbs. (6.4 KG).
  • Pressure Limits: 3 psi working, 7.5 psi maximum.
  • Approvals: Intrinsically safe–FM, BASEEFA, CSA, SAA, NKK (Japan).

MMC’s Flexi-Dip Restricted or Closed gauging tape units

 

  • Zero Ullage Reference
  • Custom-made sample 
  • Fast and easy interchange

 

Special adaptor barrels are available to other vapor-control valves

Closed or Restricted tank gauging and sounding equipment.

Portable Pressure Meters

MMC also offers a variety of additional gauging and sampling fittings such as pressure gauges for inert gas measurement, customized sounding bobs and rods, gas sampling hoses, gas sampling heads, tank bottom and zone samplers. Customized sample bottle accessories are available for use with MMC’s unique “gas-tight” product sampling system. Operators looking for to meet the sensitive requirements of “Reid Vapor Pressure” measurements can replace MMC’s standard 1-liter sampling bottle with a more appropriate container of their choice, or use a customized sample bottle and adaptor. Special Adaptor barrels can be offer to convert other maker vapor-control valves allows the valve to used with MMC Closed or Restricted Tank Gauging and Sounding equipment. Customized adaptor barrels are well-suited and verified as nil Ullage Reference will befall while analysis cargo level by supplied adaptor.

D-2401-2            2401TR30MCBSSTD        30m MMC Triple function Gauging Unit, suitable for closed (restricted) petroleum gauging via MMC Type “B” vapour control valves.2401TC30MCBSC50           “30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  Suitable for CLOSED (GAS-TIGHT) gauging of petroleum products via MMC vapour control valves model ‘C50’. BASEEFA Intrinsic Safety approval.  Calibrated in degrees Celsius.Yellow box unit with black wiper housing.2401TC15MCBSSTD15m MMC GT Triple function Gauging Unit, suitable for closed (gas tight) petroleum gauging via MMC Type “B” vapour control valves.2401TR50MCBSxxx50m MMC Triple function Gauging Unit, suitable for closed (restricted) petroleum gauging via MMC Type “xxx” vapour control valves.B-2401-13ASNSA2360-4-4SPES trimode Sensor with BarrelD-2562-1TD2326RITD2562-40Mxxx40m Tank Bottom Dryness Checking (Dipping) Device, Model D-2562-1TD, suitable for closed (restricted) petroleum service via MMC type “xxx” vapour valves.TPE-133/40M-SMPGTAP-W-HOOK40m Graduated Sample Tape & Hook to suit restricted sampling unit.AMR N5040RPush Button Seal Cap.THAB2317-30M30m STD Tape & Header Assembly.B-2401-72BTrimode Hub Coverplate with PCB AssemblyCSTF/R-F/30m30m MMC Cargo Liquid Sampling Device, Model CSTF-R-F/30m, with 35m CST reel, 51S600 sample barrel, 05L43D sample bottle and SF-F/R filler. For closed sampling via MMC type “C/F50” valves.2401TC35MCBSC5035m MMC GT Triple Function Gauging Unit, Model D-2401-2, suitable for closed (gas tight) petroleum gauging via MMC type “C50” vapour valves.B-2401-13A/40m40m STD Tape & Sensor Assembly to suit restricted Triple Function Gauging Unit.2326RITD2562-40MTS40m Tank Bottom Dryness Checking (Dipping) Device, Model D-2562-1TD, suitable for closed (restricted) petroleum service via TS type “C”-SS” vapour valves.2401TC30MCBS???30m MMC Gas Tight Triple Function Gauging Unit (ullage; oil/water interface and temperature).   Suitable for CLOSED (GAS TIGHT) gauging of Petroleum Products via MMC vapour control valves (valve type to be advised).  BASEEFA Intrinsic Safety approval.  Calibrated in degrees Celsius.2401CC30MCBS???30m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals via MMC vapour control valves (valve type to be advised).  Fitted with PES sensor.   Calibrated in Degrees Celcius and Intrinsic Safety Approval.   A2562-386TTMMC Adaptor “B” to “TVC 02”.2401TR30MCBS???30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  Suitable for CLOSED (RESTRICTED) gauging of Petroleum Products via MMC vapour control valves (valve type to be advised) or via tank hatches.  BASEEFA Intrinsic Safety approval.  Calibrated in degrees Celsius.GSASSRTT/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with Tanktech “TVC-02” vapour control valves.2401TR30MCBSxxx30m MMC Triple function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC Type “xxx” vapour control valves. GSASSRF/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with MMC type “F/C50” vapour valves.2401TF30MCBS30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). Suitable for open gauging of petroleum products via tank hatches. BASEEFA Intrinsic Safety approval. Calibrated in degrees Celsius.16H1174-150SDD16″ CL Coupling, 150# ASA, studded configuration with 5 off non ratchet type cams, stn stl studs & nuts, marine service with cam guard ring, (2) Buna O-rings (1 fitted & 1 spare) and (1) spanner wrenchOR1693BX375XS16″ Coupling O-ring – Buna-N.2401CC15MCBSMM15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals and petroleum products via MMC Vapour Control valves model MB.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval.GTADP-SETSet of Gas Tight Adaptors to allow use with “MB”, “C50”, “C2-SS” and “TVC-02” vapour valves.2401TC30MCBSSTD30m MMC GT Triple function Gauging Unit, Model D-2401-2, suitable for closed (GAS TIGHT) petroleum gauging via MMC Type “B” vapour controlvalves.2401TR15MCBSC5015m

Source & Supply of product

MMC Triple function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC Type “C50” vapour control valves.2401TC15MCBSTT15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of Petroleum Products via Tank Tech TVC-02 vapour Control valves.  Unit supplied with an adaptor to give the same 320mm deduction as the existing T-2000-TFC-02 unit on board the vessel.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval.B2562-35-R-SBDG“B” type barrel for restricted unit2401TR15MCBSxxx15m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour control valves.B2562-406-PET-40M40m MMC GT Self Contained Sampling Device, complete with 0,5 ltr Stn. Stl. zone sample can, dip bob, and (12) HDPE sample bottles, for closed (Gas Tight) sampling via MMC vapour control valves.2401SC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 1, 2 and Class 3 chemicals via MMC Vapour Control valves, type to be advised.  Fitted with PEEK sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval. Yellow Box Version with green wiper housing. TAP-WHOOK-CH Gas Tight Sample Tape & Hook Assembly.2401CC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals via MMC Vapour Control valves, type to be advised.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval. Yellow Box Version with green wiper housing.2401TC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of Petroleum Products via MMC Vapour Control valves, type to be advised.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval. Yellow Box Version with black wiper housing.2401TR15MCBS15m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  For CLOSED (RESTRICTED) Gauging of petroleum products via MMC vapour control valves, type to be advised.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval. Black open framed version.2401TC35MCBSSTD35m MMC GT Triple Function Gauging Unit, Model D2401-2, suitable for closed (gas tight) petroleum gauging via MMC type “B” vapour control valves.2401TR40MCBSxxx30m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour control valves.8H22777R150SSP38″ C-L Coupling, 150# ASA, short spool piece, with 3 off ratchet type cams, (1) lifting pad, submersible service cams, cam guard ring, (2) Buna-N O-rings (one fitted & one spare) and (1) spanner wrench.2326RITD256240MC5040m

MMC Tank Bottom Dryness (Sounding) Unit,  Model D-2562-1TD, suitable for closed (restricted) use via MMC type “C50” vapour control valves.SNSA2615-17REPLACEMENT OXYGEN SENSOR CELL ASSEMBLY2401TR30MCBSC5030m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “C50” vapour control valves.2401CC20MCBSxxx20m MMC GT Triple Function Gauging Unit, Model D2401-2, suitable for closed (gas tight) petroleum and IMO class II/III chemical gauging via MMC type “xxx” vapour control valves.SNS2360/2317TRI-MODE GAUGING TAPE SYSTEM C/W HEADER ASSY & ACC
TAPE W/ 30 M LONG
CONTROL VALVE USED F/ GAUGING : TYPE A CONTROL VALVE SIZE : 1.3/4 IN TO 2 INTHAB2317-37M37/40m STD (Restricted) Tape & Header Assembly2401TC30MCBSMM30m MMC GT Triple Function Gauging Unit, Model D-2401-2, suitable for closed (Gas Tight) petroleum gauging via MMC type “MB” vapour control valves.2318-2S-FMS-SC2” MMC Type “MB” vapour control valve with Stn stl cap. Flanged 2” 150 ASA / DN50 PN16.2401TR30MCBSMM30m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “MB” vapour valves.2401TC30MCBSxxx30m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour valves.2401TR30MCBSF5030m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “F50” vapour valves.2401TR40MCBSSTD40m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  Unit suitable for  CLOSED RESTRICTED gauging of petroleum products via MMC vapour control valves model ‘B,.   BASEEFA Intrinsic Safety approval.  Calibrated in degrees CelsiusO/R12.88BX1/2XSCL Deck Cover Buna-N O-ring.A1215-3-9CL Deck Cover Cam Bolt Assembly.A1215-SPCL Deck Cover Cam Bolt Spacer (<25mm).2401TR15MCBSMM15m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “MB” vapour valves. Restricted Storage Barrel “B” : B2562-35-B-SBGDRestricted Storage Barrel “MB” : B2562-35-MB-SBGDRestricted Storage Barrel “C50” : B2562-35-C50-SBGD