FLEXI-DIP D-2401-2 (TRI MODE)
Restricted Trimode (UTI)-UI Oil-Water Interface Gauging Tapes For Tankers
Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.
Application:
Battery: 9-Volt Duracell MN1604.
Operation: U-Ullage, I-Interface (oil/water), T-Temperature.
Tape Length
The Flexi-Dip Fixed-In-Place (FIP) sampling system, valve and “closed” sampling tape are shown above, left. Above, right is the unique MMC Model MBS fixed-in-place vapor-control valve with its built-in sampling port. The S series of valves (including BS, MBS and MMBS) are simple to install, easy to keep clean and convenient to use. The valves and Flex-Dip FIP system will support the collection of 1/2- and 1/3-liter samples. (2″ Model MBS and BS valves for 1/2-liter sampler and 1 1/2″ Model MMBS valve for 1/3-liter sampler).
The FIP system, valve and sampling tape is a gas-tight system. When its closed tape is attached to any S series valve, it can extract and bottle a sample in place without exposing the sample to the atmosphere. The sample bottle twists off easily for capping, labeling and transportation to the lab.
Designed to meet or exceed all existing vapor-control regulations, the system is totally gas-tight. It employs a unique vapor return hose assembly which directs the sample bottle’s vapors back to the tape housing to maintain the system’s gas-tight intregity.
The Flexi-Dip FIP sampling system also includes a sturdy, molded plastic carrying case for convenient transportation and safe storage with a spare battery and instruction manual. Laboratory grade, non-breakable sampling bottles are also available along with convenient sample bottle carrying racks for 4, 6, 8 or 12 bottles.
The Flexi-Dip Portable-In-Place (PIP) Self-Contained sampling system (below, left) is designed for use with a wide range of standard MMC vapor-control valves such as the B, MB, MMB and U/B units (below, right). It has a sampling valve built into the base of its barrel to make it a totally self-contained sampling unit. Once the self-contained sampling system with its built-in sampling valve is attached to any existing MMC vapor-control valve, it can extract and bottle a sample in place without exposing the sample to the atmosphere.
Like its sister FIP version, the PIP sampling system is gas-tight and designed to meet or exceed all existing vapor-control regulations. The system also features a unique vapor return hose assembly which routes the sample bottle’s vapors back to the tape housing to maintain the system’s gas-tight integrity. A carrying case, sampling bottles and sample bottle carrying racks are also available.
All MMC models are permitted Intrinsically Safe (Exia IIC T4) and as Class 1, Div. 1 gas groups’ C&D equipment and quality assured by SIRA (Baseefa) for approve ISO 9001 annual audit.
By FM, CSA, SIRA (ATEX), BV, DNV, CSS periodic safety compliance conducted.
MMC is world best maker of Portable instruments for measuring ullage, oil interface, temperature and bottom dryness in shipboard and land-based chemical and petroleum tank system.
Special adaptor barrels are available to other vapor-control valves
Closed or Restricted tank gauging and sounding equipment.
MMC also offers a variety of additional gauging and sampling fittings such as pressure gauges for inert gas measurement, customized sounding bobs and rods, gas sampling hoses, gas sampling heads, tank bottom and zone samplers. Customized sample bottle accessories are available for use with MMC’s unique “gas-tight” product sampling system. Operators looking for to meet the sensitive requirements of “Reid Vapor Pressure” measurements can replace MMC’s standard 1-liter sampling bottle with a more appropriate container of their choice, or use a customized sample bottle and adaptor. Special Adaptor barrels can be offer to convert other maker vapor-control valves allows the valve to used with MMC Closed or Restricted Tank Gauging and Sounding equipment. Customized adaptor barrels are well-suited and verified as nil Ullage Reference will befall while analysis cargo level by supplied adaptor.
D-2401-2 2401TR30MCBSSTD 30m MMC Triple function Gauging Unit, suitable for closed (restricted) petroleum gauging via MMC Type “B” vapour control valves.2401TC30MCBSC50 “30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). Suitable for CLOSED (GAS-TIGHT) gauging of petroleum products via MMC vapour control valves model ‘C50’. BASEEFA Intrinsic Safety approval. Calibrated in degrees Celsius.Yellow box unit with black wiper housing.2401TC15MCBSSTD15m MMC GT Triple function Gauging Unit, suitable for closed (gas tight) petroleum gauging via MMC Type “B” vapour control valves.2401TR50MCBSxxx50m MMC Triple function Gauging Unit, suitable for closed (restricted) petroleum gauging via MMC Type “xxx” vapour control valves.B-2401-13ASNSA2360-4-4SPES trimode Sensor with BarrelD-2562-1TD2326RITD2562-40Mxxx40m Tank Bottom Dryness Checking (Dipping) Device, Model D-2562-1TD, suitable for closed (restricted) petroleum service via MMC type “xxx” vapour valves.TPE-133/40M-SMPGTAP-W-HOOK40m Graduated Sample Tape & Hook to suit restricted sampling unit.AMR N5040RPush Button Seal Cap.THAB2317-30M30m STD Tape & Header Assembly.B-2401-72BTrimode Hub Coverplate with PCB AssemblyCSTF/R-F/30m30m MMC Cargo Liquid Sampling Device, Model CSTF-R-F/30m, with 35m CST reel, 51S600 sample barrel, 05L43D sample bottle and SF-F/R filler. For closed sampling via MMC type “C/F50” valves.2401TC35MCBSC5035m MMC GT Triple Function Gauging Unit, Model D-2401-2, suitable for closed (gas tight) petroleum gauging via MMC type “C50” vapour valves.B-2401-13A/40m40m STD Tape & Sensor Assembly to suit restricted Triple Function Gauging Unit.2326RITD2562-40MTS40m Tank Bottom Dryness Checking (Dipping) Device, Model D-2562-1TD, suitable for closed (restricted) petroleum service via TS type “C”-SS” vapour valves.2401TC30MCBS???30m MMC Gas Tight Triple Function Gauging Unit (ullage; oil/water interface and temperature). Suitable for CLOSED (GAS TIGHT) gauging of Petroleum Products via MMC vapour control valves (valve type to be advised). BASEEFA Intrinsic Safety approval. Calibrated in degrees Celsius.2401CC30MCBS???30m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature). For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals via MMC vapour control valves (valve type to be advised). Fitted with PES sensor. Calibrated in Degrees Celcius and Intrinsic Safety Approval. A2562-386TTMMC Adaptor “B” to “TVC 02”.2401TR30MCBS???30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). Suitable for CLOSED (RESTRICTED) gauging of Petroleum Products via MMC vapour control valves (valve type to be advised) or via tank hatches. BASEEFA Intrinsic Safety approval. Calibrated in degrees Celsius.GSASSRTT/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with Tanktech “TVC-02” vapour control valves.2401TR30MCBSxxx30m MMC Triple function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC Type “xxx” vapour control valves. GSASSRF/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with MMC type “F/C50” vapour valves.2401TF30MCBS30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). Suitable for open gauging of petroleum products via tank hatches. BASEEFA Intrinsic Safety approval. Calibrated in degrees Celsius.16H1174-150SDD16″ CL Coupling, 150# ASA, studded configuration with 5 off non ratchet type cams, stn stl studs & nuts, marine service with cam guard ring, (2) Buna O-rings (1 fitted & 1 spare) and (1) spanner wrenchOR1693BX375XS16″ Coupling O-ring – Buna-N.2401CC15MCBSMM15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature). For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals and petroleum products via MMC Vapour Control valves model MB. Fitted with PES sensor. Calibrated in Degrees Celsius and Intrinsic Safety Approval.GTADP-SETSet of Gas Tight Adaptors to allow use with “MB”, “C50”, “C2-SS” and “TVC-02” vapour valves.2401TC30MCBSSTD30m MMC GT Triple function Gauging Unit, Model D-2401-2, suitable for closed (GAS TIGHT) petroleum gauging via MMC Type “B” vapour controlvalves.2401TR15MCBSC5015m
Source & Supply of Product
MMC Triple function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC Type “C50” vapour control valves.2401TC15MCBSTT15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature). For CLOSED (GAS-TIGHT) Gauging of Petroleum Products via Tank Tech TVC-02 vapour Control valves. Unit supplied with an adaptor to give the same 320mm deduction as the existing T-2000-TFC-02 unit on board the vessel. Fitted with PES sensor. Calibrated in Degrees Celsius and Intrinsic Safety Approval.B2562-35-R-SBDG“B” type barrel for restricted unit2401TR15MCBSxxx15m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour control valves.B2562-406-PET-40M40m MMC GT Self Contained Sampling Device, complete with 0,5 ltr Stn. Stl. zone sample can, dip bob, and (12) HDPE sample bottles, for closed (Gas Tight) sampling via MMC vapour control valves.2401SC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature). For CLOSED (GAS-TIGHT) Gauging of IMO Class 1, 2 and Class 3 chemicals via MMC Vapour Control valves, type to be advised. Fitted with PEEK sensor. Calibrated in Degrees Celsius and Intrinsic Safety Approval. Yellow Box Version with green wiper housing. TAP-WHOOK-CH Gas Tight Sample Tape & Hook Assembly.2401CC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature). For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals via MMC Vapour Control valves, type to be advised. Fitted with PES sensor. Calibrated in Degrees Celsius and Intrinsic Safety Approval. Yellow Box Version with green wiper housing.2401TC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature). For CLOSED (GAS-TIGHT) Gauging of Petroleum Products via MMC Vapour Control valves, type to be advised. Fitted with PES sensor. Calibrated in Degrees Celsius and Intrinsic Safety Approval. Yellow Box Version with black wiper housing.2401TR15MCBS15m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). For CLOSED (RESTRICTED) Gauging of petroleum products via MMC vapour control valves, type to be advised. Fitted with PES sensor. Calibrated in Degrees Celsius and Intrinsic Safety Approval. Black open framed version.2401TC35MCBSSTD35m MMC GT Triple Function Gauging Unit, Model D2401-2, suitable for closed (gas tight) petroleum gauging via MMC type “B” vapour control valves.2401TR40MCBSxxx30m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour control valves.8H22777R150SSP38″ C-L Coupling, 150# ASA, short spool piece, with 3 off ratchet type cams, (1) lifting pad, submersible service cams, cam guard ring, (2) Buna-N O-rings (one fitted & one spare) and (1) spanner wrench.2326RITD256240MC5040m
MMC Tank Bottom Dryness (Sounding) Unit, Model D-2562-1TD, suitable for closed (restricted) use via MMC type “C50” vapour control valves.SNSA2615-17REPLACEMENT OXYGEN SENSOR CELL ASSEMBLY2401TR30MCBSC5030m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “C50” vapour control valves.2401CC20MCBSxxx20m MMC GT Triple Function Gauging Unit, Model D2401-2, suitable for closed (gas tight) petroleum and IMO class II/III chemical gauging via MMC type “xxx” vapour control valves.SNS2360/2317TRI-MODE GAUGING TAPE SYSTEM C/W HEADER ASSY & ACC
TAPE W/ 30 M LONG
CONTROL VALVE USED F/ GAUGING : TYPE A CONTROL VALVE SIZE : 1.3/4 IN TO 2 INTHAB2317-37M37/40m STD (Restricted) Tape & Header Assembly2401TC30MCBSMM30m MMC GT Triple Function Gauging Unit, Model D-2401-2, suitable for closed (Gas Tight) petroleum gauging via MMC type “MB” vapour control valves.2318-2S-FMS-SC2” MMC Type “MB” vapour control valve with Stn stl cap. Flanged 2” 150 ASA / DN50 PN16.2401TR30MCBSMM30m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “MB” vapour valves.2401TC30MCBSxxx30m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour valves.2401TR30MCBSF5030m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “F50” vapour valves.2401TR40MCBSSTD40m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). Unit suitable for CLOSED RESTRICTED gauging of petroleum products via MMC vapour control valves model ‘B,. BASEEFA Intrinsic Safety approval. Calibrated in degrees CelsiusO/R12.88BX1/2XSCL Deck Cover Buna-N O-ring.A1215-3-9CL Deck Cover Cam Bolt Assembly.A1215-SPCL Deck Cover Cam Bolt Spacer (<25mm).2401TR15MCBSMM15m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “MB” vapour valves. Restricted Storage Barrel “B” : B2562-35-B-SBGDRestricted Storage Barrel “MB” : B2562-35-MB-SBGDRestricted Storage Barrel “C50” : B2562-35-C50-SBGD
